ADJUSTABLE KETTLEBELLS

i, thanks very much for the quick reply back to me. thats great news that you gave me. Sorry to continue with the questions but i have a couple more.

i only have Olympic plates (like the 10kg, 5kg, 2.5kg and 1.25kg) does your product fit olympic plates or is it just for weider plates with the smaller holes? more . .

http://www.bwproducts.com/fitness/weights/weights/index.htm
Pretty decent prices and shipping is reasonable as well, just thought I'd share with your guys here. I plan on getting the 7.5 plates from here if I can't find them local.

I just got off the phone with one the Kettlestack guys.

It was spooky how well he knew their product and could anticipate my questions.

Even so, you folks should clean up the site or something - it's no good if the answers are there if even smart guy like me can't find me.

So, the site get's a 6 and the phone support gets a 9.5.

Thanks,

JCole. more . .

A customer asks:
"I am trying to decide which type of handle(s) to purchase and if I should just get one or two. I will be a beginner to kettlebells (but I have been lifting for 20 years) so I assume I should start out at 1 pood per kettle and work my way up. If I get the "High" handle so that I can just buy one set and be good for life will I need a lot of foam spacers to use just 1 pood? Other than front squatsa, are there many exercises that require two kettlebells at once? Thanks in advance."

The first step to getting the best kettlebell shape from your Kettlestack is understand where your forearm is going to land.
For most people that will be around 2 o'clock according to the clock we've superimposed over the image of the kettlestack.

Take alook at how the plates are tapered on this pair of 35 lbers. more . .

Here are some updated hardware pictures of the new (now over a year old) kettlestack design; 1/2"x13 hardened Grade 8 hardware and rockwell 52 hardened steel support straps:

(mid hardware shown has some extra bolts)















more . .

A customer sent us a picture of his 20lb setup (:

asking us if he set it up correctly .

That setup is pretty close to the "19" lber shown as part of this assembly sequence:
http://www.kettlestack.com/narrow_core_kettlestack_kettlebells more . .